top of page

Get More from Your Operation

The demand for higher quality forages demands new management practices, products, and methods to ensure profitability. Improve palatability, digestibility, and overall feed value with KeyAg products.

Quality Products To

Create Quality Forage

The economics of haying operations have been changing over the past decade. The cost of production, equipment and supplies, land, water, seed and fertilizer along with the demand for much higher quality forages have dictated new management practices, products and methods, to ensure profitability.

Swather_edited.jpg

Dyna-Cure

Dyna-Cure is a hay conditioner designed to improve the quality and manageability of hay forages. It works to give the natural curing process in hay an advantage. Dyna-Cure is simple and economical to apply with application equipment developed specifically for Dyna-Cure. This method of application allows for more efficient use of expensive harvesting equipment by giving the producer a management tool that adds to his flexibility.

​

  • Improves dry matter recovery and increases your return per acre.

  • Helps preserve the leaves and the small stems that contain 70% of the TDN in the plant.

  • Reduces respiration losses when applied at the swather.

  • Accelerates the curing process.

  • Stops the growth of molds and aerobic bacteria that promote spoilage, reduce hay palatability, and decreases nutrient value.

  • Dyna-Cure is stable, non-corrosive and safe to use and is simple to apply at the swather

​

Dyna-Sile

​

Dyna-Sile is an advanced silage additive for the quality production of alfalfa, grass, corn and high moisture grain silages.

 

Dyna-Sile includes enzyme agents that are used to improve the fermentation and preservation of corn, high moisture corn and cereal grain silages. Dyna-Sile can accelerate the production of lactic acid producing bacteria present in the silage mass.

​

Dyna-Sile accelerates the production of lactic acid producing bacteria present in the silage mass which promotes:

  • Higher Fermentation Acid Content

  • Conserved Feed Energy

  • Preserved Nutrient Value

  • Reduced Heating

  • Increased Feed Value

  • Improved Palatability

  • Longer bunk life

 

Dyna-Sile introduces silage specific enzymes, metabolites and antioxidants that both enhance the primary fermentation process and controls the negative secondary fermentation process to create exceptional silage qualities.

 

This dual function gives Dyna-Sile a wider window of effectiveness than any other silage additive.

 

Dyna-Cure Best Practices

​

  • Applicators:

    • Installation and nozzle placement

      • Follow installation instructions and ask you rep about placements

    • Maintenance

      • In-season: Drain and clean applicator after each cutting

      • Weatherization details here

  • Product Handling:

    • Storage

      • Keep from extreme temperatures, especially from freezing

    • Dilution

      • 6-9 oz per ton is our recommended usage

    • Mixing

      • Always mix product thoroughly before blending, and if solution sets in tanks overnight

  • Shut off irrigation water 5 days in advance (1st & 4th cutting) *(Why? More in FAQ's, below)

  • Shut off irrigation water 3-4 days in advance (2nd & 3rd cutting) *(Why? More in FAQ's, below)

    • Reduces moisture from ground and dew

    • Helps in raking onto dry ground

  • Watch applicator/product level

    • If application rate is wrong, you can be using too much or too little product.

  • Make sure your swather conditioner is set correctly for proper action

  • Raking schedule **(Why? More in FAQ's, below)

    • Check for "ready to rake" beginning day 1 after swathing (fluctuates on tonnage)

    • Rake 1- 1 1/2 days earlier (onto dry ground)

    • Reduced handling

    • Don't "rope" hay when raking, leaf shatter is not an issue

  • Moisture content

    • Monitor for best results

    • Not recommended for high-moisture baling

  • Testing

​How does Dyna-Cure Work?


 Improves dry matter recovery and increases your return per acre.


Helps preserve the leaves and the small stems that contain 70% of the TDN in the plant.


Reduces respiration losses when applied at the swather.


Accelerates the curing process.


Stops the growth of molds and aerobic bacteria that promote spoilage, reduce hay palatability, and decreases nutrient value.

 

Dyna-Cure is stable, non-corrosive and safe to use.

 

Dyna-Cure is simple to apply at the swather.


Apply Dyna-Cure at the rate of 6 -9 oz/ton of dry hay with 32 - 64 oz of water in solution.


KeyAg recommends normal baling practices when using Dyna-Cure :

 

2 tie and 3 tie bales 17% to 22% moisture.


Round bales 15% to 20% moisture.


Large square bales less than 20% moisture.

 

CAUTION: Stem moisture must be below baling moisture. Obtain accurate readings with an electronic moisture tester.

Organic Certified

OMRI Organic.png

Forage Fodder

(aka, News & Info links)

​

USDA Hay Prices here

​

Dyna-Cure™ FAQ's

​

​Dyna-Cure™ Resources

​

Dyna-Cure™ Calculator

​

Dyna-Cure™ Applicator Info

​

Dyna-Cure™ News


​

IMG953038.jpg
IT'S EASY TO SEE RESULTS

When You Work With KeyAg Distributors

1

Meet with Us

Call us to find out how we can help address your challenges and production goals.

2

Implement Your Solution

Work with us to implement the right solution for your operation.

3

See Success

Our products are effective, easy-to-use, and are proven to deliver positive results.

Our Promise To You
Improved production efficiency. Increased profitability

Our Products

Livestock

beef silhouette edited_edited.png

Equine/Companion

clipart201000.png

Agronomy

clipart1222_edited.png
bottom of page